Experimental Mixing Furnace
The mixing furnace is made of all-alloy material without spraying or electroplating, which ensures that the chamber is firm and wear-resistant. It is suitable for various formulas such as metal powder, ceramic powder and binder to stir, disperse and mix.
- Product description
The 300ml experimental mixing furnace is made of all-alloy material without spraying or electroplating, which ensures that the chamber is firm and wear-resistant. It is suitable for various formulas such as metal powder, ceramic powder and binder to stir, disperse and mix at a certain temperature. After a certain period of time when the material is muddy, the material will be discharged, and then the next process will be carried out. It is the best mixing equipment for laboratory and school teaching and proofing.
The two rotors in the mixing chamber rotate relatively at a certain speed ratio. The material from the feeding port is clamped, brought into the roll gap and thereafter squeezed and sheared by the rotors. After passing through the roll gap, the material meets the “W”-shaped cuspidal edge of the mixing chamber and is divided into two parts which return to the upper part of the rotors along the gap between the front and rear chamber walls and the rotors respectively. Under certain pressure and temperature, the material is strongly sheared and mixed inside a closed mixing chamber, so that the formula material is fully dispersed and plasticized to achieve the best effect.
(1)Superalloy liner, brand new replacement,
(2)The Mixing Room can be completely opened to clean up the materials without dead corners,
(3)Excellent powder-proof technology,
(4)Through heating system,
(5)Precise temperature control,
(6)The equipment covers a small area and is easy to operate and maintain.
|Equipment name||Experimental mixing furnace|
|Power adapter||AC380V, 50Hz/60Hz, single-phase three-wire|
|Effective mixing volume||300mL|
|Mixing material||Metal powder, ceramic powder, binder and other materials|
|Batch input quantity||0.5-1kg (depending on formula materials)|
|Speed (front/back)||0-40/34r/min (variable frequency adjustable speed, Taiwan dongyuan inverter)|